The SmartPower Strip is designed to monitor and manage multiple remote AC power connections and supports internet outage recovery.
- Attempt to automatically recover from Internet outages*
- (6) AC power outlets enabling remote monitoring and restarts
- (4) USB-C ports supporting a total power budget of 20W
- Integrated circuit breaker for current protection
*ISP modems and optical network terminals using a US AC plug are reset during an outage.
Requires a UniFi WiFi connection and a UniFi gateway.
Specifications
Mechanical
Dimensions 5 x 111.5 x 37.8 mm (9 x 4.4 x 1.5")
Weight Without Mount: 702 g (1.55 lb)
With Wall Mount: 849 g (1.87 lb)
Enclosure Material Fire Retardant Plastic
Mount Material Fire Retardant Plastic
Mounting Magnetic Wall Mount (Kit Included)
Hardware
Processor Specs ESP8266, 32-bit Tensilica LX106 Core, 160 MHz
Memory Information 4 MB Flash
Management Interface 4 GHz Wi-Fi
Networking Interface 11 b/g/n Wi-Fi
Power Output (6) Power Control Outlets,125V, 1250W Max. Total
(4) USB Type C Ports, 1.5A Max. per Port, 20W Max. Total
Buttons (1) Factory Reset
Circuit Breaker
LEDs (1) Power, Blue/White
Flashing White: Bootup in Progress
Flashing Blue: Firmware Upgrading
Steady White: Factory Defaults, Awaiting Adoption
Steady Blue: Device is Adopted
Power Consumption 1250W for 125VAC
Power Method AC Input
Power Supply AC/DC Embedded
Supported Power Voltage AC Input/Output: 125v~10A Max, 60 Hz
Operating Frequency 4 GHz
Antennas Single-Band Antenna
TX Power 16.9 dBm
MIMO 1x1, 2x1
ESD/EMP Protection Air/Contact: ± 24 kV
Operating Temperature 0 to 40° C (32 to 104° F)
Operating Humidity 10 - 90% Noncondensing
Certifications FCC, IC
Software
Wi-Fi Standards 11 b/g/n
Power Save Yes
Wireless Security WPA2-PSK AES/TKIP
Supported Data Rates (Mbps)
11b 1, 2, 5.5, 11 Mbps
11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps
11n 6.5 - 72.2 Mbps (MCS0 - MCS7, HT 20)
Manuals & Technical Documents
Manualpower-strip.pdfSpecificationUSP-Strip-US_DS.pdf