RR-VCRX-WH
RadioRA 2 Visor Control Receiver
SKU
36122
MPN:
RR-VCRX-WH
| Specifications: | |
| Model Numbers | RR-VCRX-WH |
| Power Receiver | 9 V 300 mA DC |
| Adapter: Input | 120 V 60 Hz 6.5 W |
| Adapter Output | 9 V 300 mA |
| Adapter Transmitter | 6 V 10 mA (2-CR2032, included - 10 year lifetime) |
| Typical Power Consumption | 1.6 W Test conditions: two LEDs on (two presets active), powered by the 9 V adapter supplied, no CCOs or CCIs active. |
| Regulatory Approvals | DC adapter: UL Listed for U.S. and Canada, NOM Receiver/Transmitter: FCC, IC, COFETEL, ANATEL |
| Environment: | Receiver: Ambient operating temperature: 32 ?F to 140 ?F (0 ?C to 60 ?C), 0% to 90% humidity, non-condensing. Indoor use only. Transmitter: Ambient operating temperature: -40 ?F to 235 ?F (-40 ?C to 113 ?C), 0%-90% humidity, non-condensing. Meets the Society of Automotive Engineers (SAE) temperature standards. |
| Communications | Visor Controls communicate with the system through Radio Frequency (RF). The Receiver must be located within 30 ft (9 m) of a Repeater. The typical operating distance between a Receiver and a Transmitter is 150 ft (46 m). System devices operate on frequencies between 431.0 MHz and 437.0 MHz. |
| ESD Protection | Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2. |
| Surge Protection | Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits. |
| Mounting | Mount Receiver on a wall, ceiling, or level surface using the two #6 (M3) screws provided. Clip Transmitter to a vehicle?s visor. |
| Connections | 2 Contact Closure Inputs, 1 security input, and 4 momentary or maintained Contact Closure Outputs. |
| Warranty | 1 Year Limited Warranty. |
| Design Features | Each output can be controlled locally at the Receiver or remotely by a Transmitter or keypad button. The Receiver ?Keypad? or ?Inputs? buttons can be programmed to light and shades /draperies. Design Features Full or Flash security options. The Transmitter can remotely control the ?Keypad?, ?Security Input?, and ?Outputs? buttons on the Receiver. |
Manuals & Technical Documents
SpecificationLutron-CONNECT-BDG2-1-Spec Sheet.pdf