The Intellinet Network Solutions 24-Port Gigabit Ethernet PoE+ Web-Managed Switch with 4 Gigabit Combo Base-T/SFP Ports is designed to pass both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with 24 Gigabit Ethernet ports, all of which support 802.3at/af Power over Ethernet (PoE/PoE+), the switch can power wireless LAN access points and bridges, VoIP (Voice over Internet Protocol) telephones, IP surveillance cameras and more while delivering network speeds of up to 1000 Mbps.
- Provides power and data connection for up to 24 PoE network devices
- Saves installation costs by delivering data and power over existing network cables
- 10/100/1000 Mbps auto-sensing ports automatically detect optimal network speeds
- Console port for configuring via computer
- Four combo small-form-factor pluggable GBIC module slots (SFP) and four RJ45 copper uplinks
- IEEE 802.3at/af-compliant RJ45 PoE/PoE+ output ports
- Power output up to 30 watts per port*
- PoE power budget of 370 watts
- Supports IEEE 802.3at and IEEE 802.3af-compliant PoE devices (wireless access points, VoIP phones, IP cameras)
- Supports IEEE 802.3at/af detection and short circuit, overload and high-voltage protection
- All RJ45 ports equipped with Auto-MDIX and auto-negotiation support
- The Powered Device Monitor feature (PDM) restarts any connected PoE device that fails to respond or send out network traffic.
- Web-based configuration
- Remote reboot/restart
- Supports SNMP management
- Supports VLAN (protocol-based and port-based)
- Supports link aggregation (trunking)
- IGMP Snooping for multicast filtering
- Supports bandwidth control per port
- Supports port mirroring
- Supports two types of QoS: IEEE 802.1p and DSCP
- Broadcast storm control with multicast packet rate settings
- Supports jumbo frames up to 9.6 kBytes
- Store and forward switching architecture
- Full/half duplex operation
- IEEE 802.3x flow control for full duplex
- Supports 8k MAC address entries
- LEDs for power, link/activity and PoE
- Two high-volume cooling fans to ensure perfect ventilation
- Includes 19" rackmount brackets
Standards
IEEE 802.1p (Traffic Prioritization)
IEEE 802.1q (VLAN Tagging)
IEEE 802.1w (Rapid Spanning Tree Protocol)
IEEE 802.3ad (Link Aggregation)
IEEE 802.3 (10Base-T Ethernet)
IEEE 802.3ab (Twisted Pair Gigabit Ethernet)
IEEE 802.3ad (Link Aggregation Control Protocol LACP)
IEEE 802.3af (Power over Ethernet 802.3at Type 1)
IEEE 802.3at (Power over Ethernet 802.3at Type 2)
IEEE 802.3u (100Base-TX Fast Ethernet)
IEEE 802.3x (flow control, for full duplex mode)
Packet filter/forwarding rate:
1,488,000 pps (1000 Mbps)
148,800 pps (100 Mbps)
14,880 pps (10 Mbps)
MAC address table: 8k
Buffer memory: 4.1Mb
Backplane speed / switch fabric: 56 Gbps
Switch architecture: store and forward
Configuration Options:
Port link speed: 10 Mbps, 100 Mbps, 1000 Mbps or auto-negotiation
PoE on/off per port
Flow control on/off per port
VLAN
Rate limiting (ingress rate and egress rate)
Port Mirroring
Port Aggregation / LACP: 8 groups
Broadcast Storm configuration with broadcast rate, multicast rate, and flooded unicast rate
IGMP Snooping
Quality of Service (QoS): IEEE 802.1p or DSCP
Integrated VeriPHY cable diagnostics tool
Integrated ICMP Ping client sends ping requests to other network nodes
SNMPv1/v2c (Simple Network Management Protocol)
LAN settings (IP address, Gateway, etc.)
Certifications:
FCC Class A, CE
LEDs
PoE
Power
Link/activity
Power
Input: 90 - 240 V AC, 50 - 60 Hz
Power consumption: 431.7 watts (maximum)
Environmental
Metal housing
Dimensions: 330 (L) x 440 (W) x 44 (H) [mm] / 12.99 (L) x 17.32 (W) x 1.73 (H) [in]
Weight: 4.7 kg (10.36 lbs.)
Operating temperature: 0 - 45°C (32 - 113°F)
Storage temperature: -40 - 70°C (-40 - 158°F)
Operating humidity: 10 - 90% RH, non-condensing
Package Contents
24-Port Gigabit Ethernet PoE+ Web-Managed Switch with 4 Gigabit Combo Base-T/SFP Ports
Quick Instruction Guide
Power cable
19" mounting brackets
Rubber feet