Intellinet Network Solutions IPS-16GM02-220W Gigabit Ethernet PoE+Web Managed Switch
Overview
The Intellinet Network Solutions 16-Port Gigabit Ethernet PoE+ Web-Managed Switch with 2 SFP Ports (561341) is designed to pass both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with sixteen Gigabit Ethernet ports, all of which support 802.3at/af Power over Ethernet (PoE/PoE+), this switch can power Wireless LAN access points and bridges, VoIP (Voice over Internet Protocol) telephones, IP surveillance cameras and more while delivering network speeds of up to 1,000 Mbps.
Features
- Provides power and data connection for up to 16 PoE network devices
- Save installation cost by delivering data and power over existing network cables
- Self-Healing Network - the Powered Device Monitor feature (PDM) restarts any connected PoE device that fails to respond or send out network traffic
- Domotz compatible for cloud management (may require firmware upgrade)
- 10/100/1000 auto-sensing ports automatically detect optimal network speeds
- Two small form-factor pluggable GBIC module slots (SFP)
- IEEE 802.3at/af-compliant RJ45 PoE/PoE+ output ports
- Power output up to 30 watts per port*
- PoE power budget of 220 watts
- 36 Gbps switch fabric
- Supports IEEE 802.3at and IEEE 802.3af-compliant PoE devices (wireless access points, VoIP phones, IP cameras, etc.)
- Supports IEEE 802.3at/af detection and short circuit, overload and high-voltage protection
- All RJ45 ports with Auto-MDIX and NWay auto-negotiation support
- Complies with the IEEE 802.3az (Energy Efficient Ethernet EEE) specification
- IEEE 802.3az (Energy Efficient Ethernet EEE) can be deactivated
- PoE management functions include PoE port settings, priority, power-on delay, scheduled PoE device restart and PoE device monitoring
- SNMP Management and Remote Monitoring (RMON)
- SNMP V1, V2C, V3 with RMON groups 1, 2, 3 & 9
- IPv4/v6 dual protocol
- Supports VLAN (tag-based and port-based)
- Provides IEEE 802.1x port-based security
- Supports link aggregation (trunking)
- Supports bandwidth control per port
- Supports port mirroring
- Supports two types of QoS: port-based and DSCP
- Broadcast storm control with multicast packet rate settings
- 512 kBytes buffer memory
- Supports 8k MAC address entries
- Supports jumbo frames up to 9 kBytes
- Supports Rapid Spanning Tree/Spanning Tree protocol
- Store and forward switching architecture
- Full/half duplex operation
- IEEE 802.3x flow control for full duplex
- Configuration via Web browser, Telnet or SSH
- Remote Reboot/restart
- LEDs for power, link/activity and PoE
- Two high-volume cooling fans ensure perfect ventilation
- Fully NDAA-compliant
Specifications
Standards
IEEE 802.1d (Spanning Tree Protocol)
IEEE 802.1p (Traffic Prioritization)
IEEE 802.1q (VLAN Tagging)
IEEE 802.1w (Rapid Spanning Tree Protocol)
IEEE 802.3ad (Link Aggregation)
IEEE 802.3 (10Base-T Ethernet)
IEEE 802.3ab (Twisted Pair Gigabit Ethernet)
IEEE 802.3ad (Link Aggregation Control Protocol LACP)
IEEE 802.3az (Energy Efficient Ethernet EEE) (can be deactivated)
IEEE 802.3af (Power over Ethernet 802.3at Type 1)
IEEE 802.3at (Power over Ethernet 802.3at Type 2)
IEEE 802.3u (100Base-TX Fast Ethernet)
IEEE 802.3x (flow control, for full duplex mode)
Media support:
10Base-T Cat3, 4, 5 UTP/STP RJ45
100Base-TX Cat5 UTP/STP RJ45
1000Base-T Cat5e UTP/STP RJ45
Packet filter/forwarding rate:
1,488,000 pps (1000 Mbps)
148,800 pps (100 Mbps)
14,880 pps (10 Mbps)
MAC address table: 8k
Buffer memory: 512 kBytes
Backplane speed / switch fabric: 36 Gbps
Switch architecture: store and forward
Configuration options:
Port link speed: 10 Mbps, 100 Mbps, 1000 Mbps or auto-negotiation
PoE on/off per port
PoE maximum power per port
PoE mode per port
PoE port priority
PoE device monitor
Flow control on/off per port
VLAN
Rate limiting (ingress rate and egress rate)
Port Mirroring
Port Isolation
Port Aggregation/LACP: 8 groups
Broadcast Storm configuration with broadcast rate, multicast rate, and flooded unicast rate
Quality of Service (QoS): port-based or DSCP
Link Layer Discovery Protocol (LLDP) - Station and Media Access Control Connectivity Discovery
Integrated ICMP Ping client sends ping requests to other network nodes
SNMPv1/v2c/v3 (Simple Network Management Protocol)
RMON (1,2,3 & 9 groups)
LAN settings (IP address, Gateway, etc.)
SSHv2
TACAS+
Pinout RJ45 output ports (Data + Power)
IEEE Alternative B
Requires 8-pin RJ45 network cable
Pin 1: Rx+ (data receive)
Pin 2: Rx- (data receive)
Pin 3: Tx+ (data transmit)
Pin 4: -Vdc_return (+) (feeding power [+])
Pin 5: -Vdc_return (+) (feeding power [+])
Pin 6: Tx- (data transmit)
Pin 7: -Vdc (feeding power [-])
Pin 8: -Vdc (feeding power [-])
Certifications:
FCC Class A, CE
LEDs
PoE
Power
Link/activity
Power
Input: 100 - 240 VAC, 50 - 60 Hz
Power consumption: 260 watts (maximum)
Environmental
Metal housing
Dimensions: 440 (W) x 208 (L) x 44 (H) [mm] (17.32 (W) x 8.19 (L) x 1.73 (H) [in])
Weight: 2.5 kg (5.5 lbs.)
Operating temperature: 0 - 40°C (32 - 104°F)
Operating humidity: 10 - 90% RH, non-condensing
Storage temperature: -20 - 90°C (-4 - 194°F)
Package Contents
16-Port Gigabit Ethernet PoE+ Web-Managed Switch with 2 SFP Ports
Power cable
User manual
19" rackmount brackets