Skip to the beginning of the images gallery

SC-HRSIW8-CAB

Dual 8" In-Wall Subwoofer

SKU

66898

MPN:

SC-HRSIW8-CAB

Report Incorrect Information

Please select affected area

Your Feedback *

Your Email *

Overview

The SC-HRSIW8-CAB with StillBass mechanical vibration elimination is the perfect solution when seeking an in-wall subwoofer. Wrapped in an ultra-thin cabinet that you can utilize every Watt with virtually no mechanical vibration whatsoever.

Features

Two Active 8" High Back EMF Drivers deliver the most accurate bass made possible.
Create your own sound profile with the professional-grade Custom Digital Audio Adjustments.
Anti-Shake StillBass Technology eliminates mechanical noises so you can turn the sound up and enjoy the incredible bass experience.
Proprietary Frequency Filtration Design technology makes the dedicated amplifier the perfect match for this subwoofer.
Pre-Programmed Remote Control lets you dial in the perfect sound from the comfort of your chair.
The HRSIW8AMP Subwoofer Amplifier is sold separately.
Cutout: 23.35” x 10.79” (593 x 274 mm)
Dimensions: (L x W x H) 24.61 x 12.05 x 3.74 in

Specifications

Specifications SC-HRSIW8-CAB Woofer: Dual 8" Woofers with Fiberglass Cones Power: 150-600 Watts Cabinet Type: Sealed Cabinet, High-Pressure Design Dimensions: 23.35" x 10.79" (593 x 274 mm) Weight: 32 lbs. / 14.51 kg General Family: HRS Woofer Size: 8 (Inches) Shipping Info Length:31 (Inches) Width: 12 (Inches) Height: 19.5 (Inches) Weight: 36 (Lbs) Unit of Measure: Each UPC: 844039011657 Master Pack Qty: 1 Other Specifications Design Sealed Cabinet, High Pressure Design. To be used with the dedicated HRSIW8 amplifier only. StillBass anti-shake technology. Drive Units: Dual 8" Woofers with fiberglass cones Connections:1 pair gold plated spring terminals Dimensions (Maximum dimensions, including grille): Height 24 5/8" (625 mm), Width 12 1/16" (306 mm), Depth 3 3/4" (95 mm) from back of steel bezel to rear of cabinet) Cutout: 23 5/16" x 10 13/16" (593 x 274 mm) Weight: 32 lbs (14.51 kg) The following specifications are from the HRSIW8 amplifier owner"'s manual: Frequency Response: 33 Hz - 150 Hz (-3 dB) Crossover Frequency: The DSP section of the amplifier allows the high cut filter to be adjusted from 40 Hz - 160 Hz, with an LFE bypass position, and 12 to 36 dB/octave adjustable slope Maximum Power: 520 watts rms Maximum Output: Greater than 106 dB peak SPL (includes room gain) Measured at 1 meter, anechoic