UAP-NANOHD-3-US
UniFi Dual-Band Access Point nanoHD- 3 Pack
- Four-stream, 802.11ac Wave 2 WiFi technology
- 5 GHz (4x4 MU-MIMO) band with a 1.733 Gbps throughput rate
- 2.4 GHz (2x2 MIMO) band with a 300 Mbps throughput rate
Ubiquiti UAP-NANOHD-3-US The Access Point nanoHD is a compact, dual-band access point that can reach a 2+ Gbps aggregate throughput rate with its 5 GHz (4x4 MU-MIMO) and 2.4 GHz (2x2 MIMO) bands. The nanoHD can also support over 200 concurrently connected clients while maintaining an even, reliable wireless experience across the entire network. With its elegant, nano-sized design, this access point can be staged virtually anywhere indoors where you'd like to enhance the wireless speed and performance. Built for plug-and-play simplicity, the UAP nanoHD can be set up in minutes and fully managed with the UniFi Network web application or mobile app.
- Four-stream, 802.11ac Wave 2 WiFi technology
- 5 GHz (4x4 MU-MIMO) band with a 1.733 Gbps throughput rate
- 2.4 GHz (2x2 MIMO) band with a 300 Mbps throughput rate
- 200+ concurrent client capacity
- Powered by 802.3af PoE
| Dimensions | 160 x 160 x 32.65 mm (6.3 x 6.3 x 1.29") |
| Weight With Mounting Kits |
300 g (10.6 oz) 315 g (11.1 oz) |
| Networking Interface | (1) RJ45 GbE |
| Buttons | (1) Reset to Defaults |
| Power Method | 802.3af |
| Power Supply | UniFi Switch (PoE) |
| Max. Power Consumption | 10.5W |
| Operating Frequency | 2.4 GHz 5 GHz |
| Max. TX Power 2.4 GHz 5 GHz |
23 dBm 26 dBm |
| Antenna Gain 2.4 GHz 5 GHz |
2.8 dBi 3 dBi |
| MIMO 2.4 GHz 5 GHz |
2x2 4x4 |
| Throughput 2.4GHz 5GHz |
300 Mbps 1733 Mbps |
| Wi-Fi Standards | 802.11 a/b/g/n/ac/ac-wave2 |
| Wireless Security | WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) |
| BSSID | 8 per Radio |
| Mounting | Wall/Ceiling (Kits Included) |
| Operating Temperature | -10 to 70° C (14 to 158° F) |
| Operating Humidity | 5 to 95% Noncondensing |
| Certifications | CE, FCC, IC |
Manuals & Technical Documents
SpecificationUbiquiti Networks-UAP-NANOHD-3-US-Spec Sheet.pdf
