- HDMI 2.0
- 18Gbps Bandwidth Support (Using ICT)
- Up to 4K60 4:4:4 Support
- Full HDR Support
The debut of the legendary AC-EX40-444-KIT featured the premiere of AVPro Edge’s transformative Invisible Compression Technology (ICT), the unprecedented, standard-setting gateway for video excellence in HDMI extension research, development, and the preamble for products designed to transport UHD 4K60 4:4:4 signals across the copper category cable domain.
The revolutionary AC-EX40-444-KIT was the first implementation of AVPro Edge’s proprietary ICT, demonstrating that an 18Gbps, UHD 4K60 4:4:4 video signal could transit twisted pair copper with artifact-free, dynamic, deep color aplomb. HDR metadata, static or dynamic, rides untouched atop the video signal as the AC-EX40-444-KIT flawlessly delivers perfect-to-the-pixel, high bandwidth, top-tier image fidelity.
Invisible Compression Technology: ICT revolutionized HDMI extension technology implemented into HDBaseT. Bandwidth limitations with 4K signals sent through copper category 5E, 6, and 6A cabling are overcome by our proprietary algorithm. Compatible with all HDR and high-bitrate audio codec metadata, the highest quality display devices remain artifact-free when accepting ICT signals.
- HDMI 2.0(a/b)
- 18Gbps Bandwidth Support (Using ICT)
- Ultra Slim (.47 inch/12mm)
- Up to 4K60 4:4:4 Support
- Full HDR Support (HDR 10 & 12 Bit)
- HDR, HDR10+ and HLG Support
- Dolby Vision Support
- 4K --> 1080p Down-scaling for Mixed Systems
- EDID Management and EDID Emulate
- 4K & HD Test Patterns built in to Tx and Rx for troubleshooting
- L/R Audio Extraction on Tx and Rx
- HDCP 2.2 (and all earlier versions supported)
- CEC Pass Through
- 3D Support
- 70M (230ft) on 1080P (CAT6a)
- Up to 40m (131ft) on 4K (up to 4K60 4:4:4, HDR) (CAT6a)
- Bi-directional 48v PoH (Power Over HDBaseT, only one Power Supply Needed)
- I-Pass Feature for control system “pass-through”
- 3-20v protection circuit built in for safe IR transport
- Bi Directional RS232 Transport
- LED Status, Link, Power indication lights
- Use single UTP/STP LAN cable (CAT-5E/6A) with substitute HDMI cable to achieve long distance transmission.
- Supports uncompressed PCM 2- Ch., LPCM 5.1 & 7.1, Dolby Digital, DTS, Dolby TrueHD, DTS HD-Master Audio, Atmos
- ESD protection circuitry (Inputs & Outputs) to 7KV
- Can Cascade
| Video: | |
| Video Resolutions | Up to 4K 60Hz 4:4:4 |
| VESA Resolutions | Up to DCI 4K (4096x2160) |
| HDR Formats | HDR10, HDR10+, HDG, Dolby Vision, Low Latency Dolby Vision |
| Color Space | YUV (Component), RGB (CSC: Rec. 601, Rec. 709, BT2020, DCI, P3 D6500) |
| Chroma Subsampling | 4:4:4, 4:2:2, 4:2:0 Supported |
| Color Bit Depth | Up to 16 bit (1080), Up to 12 bit (4K) |
| Down Scaling | 4K (and HDR) down to 2K |
| Audio: | |
| Audio Formats Supported HDMI | PCM 2.0 Ch, LPCM 5.1 & 7.1, Dolby Digital, DTS 5.1, Dolby Digital Plus, Dolby TrueHD, DTS-HD Master Audio, DTS-X, Dolby Atmos |
| Audio Formats Supported Extracted (2CH) | PCM 2 Ch (No Downmix) |
| Distance: | |
| HDBaseT (CAT) Distance (4K) | 40 Meters / 131 Feet (Cat 6a) |
| HDBaseT (CAT) Distance (Full HD) | 70 Meters / 230 Feet (Cat 6a) |
| HDMI Lead In/Out (4K60 4:4:4) | Up to 50 Feet (using Bullet Train HDMI) |
| HDMI Lead In/Out (w/ AOC Cable) (4K60 4:4:4) | Up to 130 Feet (using Bullet Train AOC) |
| Other: | |
| Bandwidth | 18 Gbps (W/ ICT) |
| HDCP | HDCP 2.2 and Earlier (HDCP 2.3 support with firmware update) |
| Ports: | |
| HDMI (TX & RX) | Type A |
| Audio (Extracted Analog) | 3 pin terminal block (Unbalanced) |
| IR TX (TX & RX) | 3.5mm Mono (2 Conductor) |
| IR RX (TX & RX) | 3.5mm Stereo (3 Conductor) |
| RS232 (TX & RX) | 3-pin terminal block |
| Power (TX & RX) | 2-Pin Terminal Block |
| Environmental: | |
| Operating Temperature | 23 to 125°F (-5 to 51°C) |
| Storage Temperature | -4 to 140°F (-20 to 60°C) |
| Humidity Range | 5-90% RH (No Condensation) |
| Power: | |
| Power Consumption (Total) | 12 Watts Max |
| Power Supply - Matrix | Input: AC 100-240V ~ 50/60Hz Output: DC 48V 0.5A |
| Dimensions: | |
| Dimensions (Single Unit Only, TX/RX are Same) (Height/Depth/Width) (TX/RX Each Alone) | mm: 129 x 92 x 12 inch: 5.05 x 3.62 x 0.47 |
| Dimensions (Packaged Height/Depth/Width) (Kit) | mm: 203 x 165 x 91 inch: 8 x 6.5 x 3.6 |
| Weight (Unit) (TX or RX Each Only) | 0.3 lbs (0.13 kg) |
| Weight (Packaged) | 2 lbs (0.90 kg) |
| *Specifications subject to change without notice. Mass & dimensions are approximate | |